SFP-10G-LR-1310nm 20km LC DDM Optical Transceiver

SFP-10G-LR-1310nm 20km LC DDM Optical Transceiver Module CISCO, HUAWEI, H3C, Juniper, D-link, HP, IBM, dell, Mikrotik, Aruba,Quidway Compatible This 10GBase-LR 1310nm SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length of 20/40/60km.

What Is SFP-10G-LR-1310nm 20km LC DDM Optical Transceiver Module

SFP-10G-LR-1310nm 20km LC DDM Optical Transceiver Module CISCO, HUAWEI, H3C, Juniper, D-link, HP, IBM, dell, Mikrotik, Aruba,Quidway Compatible This 10GBase-LR 1310nm SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length of 20/40/60km.

Data Rate10GFiber ModeSingle Mode Fiber
Types of InterfaceLCTypes of LaserDFP
Operating TemperatureStandard 0~70??COperating Humidity0%~90% RH (non condensing)
Transmission distance20/40/60kmModes of CommunicationsDuplex
Receiver Sensitivity<-14.4dBmExtinction Ratio>3.5dB
Saturated Optical Power-3dBmPower Consumption<2W
Hot Pluggable Times200Average Output Power-8.2 ~ -0.5dBm

Features SFP-10G-LR-1310nm 20km LC DDM Optical Transceiver??

  1. Optical interface compliant to IEEE 802.3ae 10GBASE-LR
  2. Electrical interface compliant to SFF-8431
  3. Hot Pluggable
  4. 1310nm DFB transmitter, PIN photo-detector
  5. Low power consumption
  6. Applicable for 10km/20km SMF connection
  7. All-metal housing for superior EMI performance
  8. Advanced firmware allow customer system encryption information to be stored in transceiver
  9. Cost effective SFP+ solution, enables higher port densities and greater bandwidth
SFP-10G-LR-1310nm 20km LC DDM Optical Transceiver Module
SFP-10G-LR-1310nm 20km LC DDM Optical Transceiver Module


The small form-factor pluggable (SFP) is a compact, hot-pluggable network interface module used for both telecommunication and data communications applications. An SFP interface on networking hardware is a modular slot for a media-specific transceiver in order to connect a fiber-optic cable or sometimes a copper cable.The advantage of using SFPs compared to fixed interfaces (e.g. modular connectors in Ethernet switches) is that individual ports can be equipped with any suitable type of transceiver as needed.

Long Range

LR(Long Range)is used for long-range data transmission, such as large compuses or Metro Area Network. It can be either single mode or multimode and has the advantages of low cost, low power consumption, small size and high density.

What is an (Fiber) Optical Transceiver

An Optical transceiver module is the core part of optical communication devices. It uses fiber optical technology to send and receive data through completing the process of optical signal – electrical signal / electrical signal – optical signal conversion. An optical transceiver module consists of two parts: the receiving part and the transmitting part. The receiving part realizes the photo-electric conversion, and the transmitting part realizes the electro-optical conversion.

Usually, one end of the transceiver will be connected to a cable and the opposite end of will have a special connector for fitting it into specific models of enterprise-grade Ethernet switches, routers or network interface cards

How to Classify Optical Transceivers

In order to meet a variety of needs of transmission, the manufacturers launched a variety of categories of optical modules. Below are some common methods to classify them.

1)Sort by Rate

400GE optical transceiver module,

200GE optical transceiver module,

100GE optical transceiver module,

40GE optical transceiver module,

25GE optical transceiver module,

10GE optical transceiver module and etc.

2)Sort by Package

The higher the transmission rate of the optical transceiver, the more complex the structure. In order to meet the needs of different structures, a variety of packaging types of optical transceiver modules were designed. For example, XFP, SFP, SFP+ for 10G transceivers, QSFP+ for 40G transceivers, CFP4, CFP2 and QSFP28 for 100G transceivers, as well as the latest OSFP and QSFP-DD for 400G transceivers.

  • XFP (10GB Small Form-factor Pluggable) optical module: “X” is the abbreviation of Roman numerals 10, all XFP modules are 10G optical module. The XFP optical module supports LC fiber optic connectors and supports hot plugging. Compared to SFP+ and SFP optical modules, XFP optical modules are larger and longer.
  • SFP (Small Form-factor Pluggable) optical module: smaller than XFP, SFP optical modules support LC fiber optic connectors, hot plugging.
  • SFP+ (Small Form-factor Pluggable Plus) optical module: SFP+ refers to the increased rate of SFP module, sensitive to EMI.
  • QSFP+ (Quad Small Form-factor Pluggable Plus) optical module: four-channel small hot plugging optical module. The QSFP + optical module supports MPO fiber connectors, which are larger in size than SFP + optical modules.
  • CFP (Centum Form-factor Pluggable) optical module: length ?? width ?? height of CFP is defined as 144.75mm ?? 82mm ?? 13.6mm, high-speed, hot plugging and supporting for data communications and telecommunications applications.
  • QSFP28 optical module: the interface package size of QSFP28 is the same with QSFP+, which is mainly used in Data Center application.
  • OSFP (Octal Small Form Factor Pluggable) optical module: the OSFP is a new pluggable form factor with eight high speed electrical lanes that will initially support 400 Gbps (8x50G). It is slightly wider and deeper than the QSFP but it still supports 32 OSFP ports per 1U front panel, enabling 12.8 Tbps per 1U.
  • QSFP-DD (Quad Small Form Factor Pluggable Double Density) optical module: QSFP-DD is a new module and cage/connector system similar to current QSFP, but with an additional row of contacts providing for an eight lane electrical interface. It is being developed by the QSFP-DD MSA as a key part of the industry??s effort to enable high-speed solutions.
Optical Transceiver Module classification
Optical Transceiver Module classification
Optical Transceiver Module classification
Optical Transceiver Module classification


3)Sort by Physical Layer Standard

In order to allow the data to be transmitted in different conditions and applications, optical communication industry defined of a variety of different physical layer standards, which resulting in a variety of optical transceiver modules supporting different standards.

For example, IEEE and MSA industry alliances have set several criteria for the 100G QSFP28 optical modules, like SR4, LR4, ER4, PSM4, CWDM4 and etc.

4)Sort by Pattern

As we all know, fiber can be divided into single-mode fiber and multi-mode fiber. In order to use different type of fiber, we also classify optical transceiver modules into single-mode optical modules and multi-mode optical modules.

Single-mode optical module is used to match single-mode fiber with better transmission capacity, which is suitable for long-distance transmission.

Multi-mode optical module is used to match multi-mode fiber. Multimode fiber has the defect of mode dispersion, its transmission performance is poorer than single-mode fiber. However, with better cost performance, they are popular in smaller capacity, short distance transmission.

How to choose the right optical module

With the rapid development of information technology, the application of optical communication has become more and more popular. With the advantages of large capacity and high-speed transmission, Fiber Optic Transceiver Modules is playing a more and more important role. Where there is fiber, the optical module is needed, and the selection and purchase of the optical module has become the focus of the front-line engineering technicians or purchasing personnel.
There are many types of optical transceivers on the market, often dazzling. So, how to choose the most suitable module in many different speed, different packaging, different functions of the Optical Transceiver Module We will give you some tips.

Choose the module based on your usage environment

How fast the speed of transmission you need 155M, 1G, 10G or 100G The higher transmission rate means higher cost investment. For example, the application environment of FTTH, it’s enough to use about 1G speed products for current bandwidth. It’s not necessary to choose 10G products with more money.

Optical Transceiver Module Data Rate
Optical Transceiver Module Data Rate

Transmission distance

The common optical modules are divided into short distance (300M-2KM), middle distance (10KM-40KM), long distance (>40km), The farther the transmission distance, the higher the technical and technological requirements of the optical module.

Optical Transceiver Module Transmission Distance
Optical Transceiver Module Transmission Distance

Modules Compatibility

Modules Compatibility
Modules Compatibility

When purchasing optical modules, need to confirm whether it can be compatible with your devices. Common switch brands like CISCO, HUAWEI, H3C, Juniper, D-link, HP, IBM, dell, Mikrotik etc., modules need to be tested compatibility before shipment. Before purchasing, it is best to confirm that it can be perfectly compatible with the corresponding brand switch.

Select the original one or compatible one according to the budget situation

The original module is reliable but the price is too high, compatible module is cost-effective, comparable to the original module. Different users need to make specific choices according to the budget.

After-sale service

Although the optical module is a mature optical communication device, most manufacturers’ products are stable and reliable. However, there may be some problems in the use after purchase, so choose the vendors who have after-sales service and technical support are more secure.
SFP-10G-LR-1310nm 20km LC DDM Optical Transceiver



SFP-10G-LR-1310nm 20km LC DDM

Get In Touch

Whether you have a problem with our products, services or other things, you can ask us, our team is waiting for you!