QSFP28 100G CWDM 1310nm 2km Optical Transceiver

QSFP28 100G CWDM 1310nm 2km Optical Transceiver Module CISCO, HUAWEI, H3C, Juniper, D-link, HP, IBM, dell, Mikrotik, Aruba,Quidway Compatible is a Four-Channel, Pluggable, dual LC, Fiber-Optic QSFP28 Transceiver for 100G Ethernet applications.

What is QSFP28 100G CWDM 1310nm 2km Optical Transceiver Module

QSFP28 100G CWDM 1310nm 2km Optical Transceiver Module CISCO, HUAWEI, H3C, Juniper, D-link, HP, IBM, dell, Mikrotik, Aruba,Quidway Compatible is a Four-Channel, Pluggable, dual LC, Fiber-Optic QSFP28 Transceiver for 100G Ethernet applications.The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 26Gbps operation for an aggregate data rate of 104Gbps 2km using single mode fiber. These modules are designed to operate over single mode fiber systems using 1271nm-1331nm DFB laser array.QSFP28 CWDM4 is one kind of transceiver which provides increased port density and total system cost savings. They are compliant with the QSFP28 MSA, CWDM4 MSA and portions of IEEE P802.3bm.

Product Features

  1. Four-channel full-duplex transceiver modules.
  2. Transmission data rate up to 26Gbit/s per channel.
  3. Up to 2km transmission of single mode fiber.
  4. Low power consumption <3.5W.
  5. Operating case temperature 0?? to +70??.
  6. 3.3V power supply voltage.
  7. RoHS 6 compliant.
  8. Hot Pluggable QSFP form factor.
  9. LC connector receptacle.
  10. Built-in digital diagnostic function


  1. 100G Ethernet.
  2. Proprietary High Speed Interconnections.
  3. Datacenter.
  4. 100G CWDM4 application with FEC
QSFP28 100G CWDM 1310nm 2km Optical Transceiver Module B
QSFP28 100G CWDM 1310nm 2km Optical Transceiver Module B

Regulatory Compliance

Electromagnetic Interference (EMI)FCC Part 15 Class B EN 55022:2010, Class BCompatible with standards
Electromagnetic susceptibility (EMS)EN 55024:2010Compatible with standards
Laser Eye SafetyFDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2Compatible with Class I laser product

Absolute Maximum Ratings

The operation in excess of any absolute maximum ratings might cause permanent damage to this module.

Storage TemperatureTS-4085??
Operating Case TemperatureTOP070??
Supply VoltageVCC-0.33.6V
Input VoltageVin-0.3Vcc+0.3V
Relative Humidity (non-condensation)RH085%

Recommended Operating Conditions and Power Supply Requirements

Operating Case TemperatureTOP070??
Power Supply VoltageVCC3.1353.33.465V
Data Rate, each LaneDR25.78125Gb/s
Power Consumption3.5W
Data Speed ToleranceDR-100+100ppm
Link Distance with G.652D010km

Electrical Characteristics

The following electrical characteristics are defined over the Recommended Operating Environment unless otherwise specified.

Differential input impedanceZin90100110ohm
Differential input impedanceZout90100110ohm
Differential input voltage amplitude??Vin3001100mVp-p
Differential output voltage amplitude??Vout500800mVp-p
Input Logic Level HighVIH2.0VCCV
Input Logic Level LowVIL00.7V
Output Logic Level HighVOHVCC-0.5VCCV
Output Logic Level LowVOL00.4V

Optical Characteristics

Wavelength AssignmentL01264.512711277.5nm
RMS Spectral Width??rms3.5nm1
Average Launch Power, each lanePAVG-6.5-0.5+2.5dBm
Optical Modulation Amplitude (OMA)POMA-4-0.5+2.5dBm1
Difference in Launch Power between any two lanesPtx,diff4.0dB
Transmitter and Dispersion Penalty per LaneTDP3dBm
Rise/Fall TimeTr/Tf30ps
Extinction RatioER3.5dB
Transmitter ReflectanceRT-12dB
Transmitter Eye Mask MarginEMM10%2
Average Launch Power OFF Transmitter, each LanePoff-30dBm
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3}{0.31, 0.4, 0.45, 0.34, 0.38, 0.4}
Wavelength AssignmentL01264.512711277.5nm2
Total Average Receive PowerL11284.512911297.5nm
Average Receive Power, each LaneL21304.513111317.5nm
Receiver ReflectanceL31324.513311337.5nm
Damage ThresholdTHd+3dBm
Overload, each laneOVL+2.5dBm3
Receiver Sensitivity in OMA, each LaneSEN-10dBm
Signal Loss Assert ThresholdLOSA-30dBm
Signal Loss Deassert ThresholdLOSD-15dBm
LOS HysteresisLOSH0.51.56dB
Optical Return LossORL-12dBm


  1. Transmitter wavelength, RMS spectral width and power need to meet the OMA minus TDP specs to guarantee link performance.
  2. The eye diagram is tested with 1000 waveform. 3. Sensitivity is specified at 5×10-5 BER.

What is an (Fiber) Optical Transceiver

An Optical transceiver module is the core part of optical communication devices. It uses fiber optical technology to send and receive data through completing the process of optical signal – electrical signal / electrical signal – optical signal conversion. An optical transceiver module consists of two parts: the receiving part and the transmitting part. The receiving part realizes the photo-electric conversion, and the transmitting part realizes the electro-optical conversion.

Usually, one end of the transceiver will be connected to a cable and the opposite end of will have a special connector for fitting it into specific models of enterprise-grade Ethernet switches, routers or network interface cards

How to Classify Optical Transceivers

In order to meet a variety of needs of transmission, the manufacturers launched a variety of categories of optical modules. Below are some common methods to classify them.

1)Sort by Rate

400GE optical transceiver module,

200GE optical transceiver module,

100GE optical transceiver module,

40GE optical transceiver module,

25GE optical transceiver module,

10GE optical transceiver module and etc.

2)Sort by Package

The higher the transmission rate of the optical transceiver, the more complex the structure. In order to meet the needs of different structures, a variety of packaging types of optical transceiver modules were designed. For example, XFP, SFP, SFP+ for 10G transceivers, QSFP+ for 40G transceivers, CFP4, CFP2 and QSFP28 for 100G transceivers, as well as the latest OSFP and QSFP-DD for 400G transceivers.

  • XFP (10GB Small Form-factor Pluggable) optical module: “X” is the abbreviation of Roman numerals 10, all XFP modules are 10G optical module. The XFP optical module supports LC fiber optic connectors and supports hot plugging. Compared to SFP+ and SFP optical modules, XFP optical modules are larger and longer.
  • SFP (Small Form-factor Pluggable) optical module: smaller than XFP, SFP optical modules support LC fiber optic connectors, hot plugging.
  • SFP+ (Small Form-factor Pluggable Plus) optical module: SFP+ refers to the increased rate of SFP module, sensitive to EMI.
  • QSFP+ (Quad Small Form-factor Pluggable Plus) optical module: four-channel small hot plugging optical module. The QSFP + optical module supports MPO fiber connectors, which are larger in size than SFP + optical modules.
  • CFP (Centum Form-factor Pluggable) optical module: length ?? width ?? height of CFP is defined as 144.75mm ?? 82mm ?? 13.6mm, high-speed, hot plugging and supporting for data communications and telecommunications applications.
  • QSFP28 optical module: the interface package size of QSFP28 is the same with QSFP+, which is mainly used in Data Center application.
  • OSFP (Octal Small Form Factor Pluggable) optical module: the OSFP is a new pluggable form factor with eight high speed electrical lanes that will initially support 400 Gbps (8x50G). It is slightly wider and deeper than the QSFP but it still supports 32 OSFP ports per 1U front panel, enabling 12.8 Tbps per 1U.
  • QSFP-DD (Quad Small Form Factor Pluggable Double Density) optical module: QSFP-DD is a new module and cage/connector system similar to current QSFP, but with an additional row of contacts providing for an eight lane electrical interface. It is being developed by the QSFP-DD MSA as a key part of the industry??s effort to enable high-speed solutions.
Optical Transceiver Module classification
Optical Transceiver Module classification
Optical Transceiver Module classification
Optical Transceiver Module classification


3)Sort by Physical Layer Standard

In order to allow the data to be transmitted in different conditions and applications, optical communication industry defined of a variety of different physical layer standards, which resulting in a variety of optical transceiver modules supporting different standards.

For example, IEEE and MSA industry alliances have set several criteria for the 100G QSFP28 optical modules, like SR4, LR4, ER4, PSM4, CWDM4 and etc.

4)Sort by Pattern

As we all know, fiber can be divided into single-mode fiber and multi-mode fiber. In order to use different type of fiber, we also classify optical transceiver modules into single-mode optical modules and multi-mode optical modules.

Single-mode optical module is used to match single-mode fiber with better transmission capacity, which is suitable for long-distance transmission.

Multi-mode optical module is used to match multi-mode fiber. Multimode fiber has the defect of mode dispersion, its transmission performance is poorer than single-mode fiber. However, with better cost performance, they are popular in smaller capacity, short distance transmission.

How to choose the right optical module

With the rapid development of information technology, the application of optical communication has become more and more popular. With the advantages of large capacity and high-speed transmission, Fiber Optic Transceiver Modules is playing a more and more important role. Where there is fiber, the optical module is needed, and the selection and purchase of the optical module has become the focus of the front-line engineering technicians or purchasing personnel.
There are many types of optical transceivers on the market, often dazzling. So, how to choose the most suitable module in many different speed, different packaging, different functions of the Optical Transceiver Module We will give you some tips.

Choose the module based on your usage environment

How fast the speed of transmission you need 155M, 1G, 10G or 100G The higher transmission rate means higher cost investment. For example, the application environment of FTTH, it’s enough to use about 1G speed products for current bandwidth. It’s not necessary to choose 10G products with more money.

Optical Transceiver Module Data Rate
Optical Transceiver Module Data Rate

Transmission distance

The common optical modules are divided into short distance (300M-2KM), middle distance (10KM-40KM), long distance (>40km), The farther the transmission distance, the higher the technical and technological requirements of the optical module.

Optical Transceiver Module Transmission Distance
Optical Transceiver Module Transmission Distance

Modules Compatibility

Modules Compatibility
Modules Compatibility

When purchasing optical modules, need to confirm whether it can be compatible with your devices. Common switch brands like CISCO, HUAWEI, H3C, Juniper, D-link, HP, IBM, dell, Mikrotik etc., modules need to be tested compatibility before shipment. Before purchasing, it is best to confirm that it can be perfectly compatible with the corresponding brand switch.

Select the original one or compatible one according to the budget situation

The original module is reliable but the price is too high, compatible module is cost-effective, comparable to the original module. Different users need to make specific choices according to the budget.

After-sale service

Although the optical module is a mature optical communication device, most manufacturers’ products are stable and reliable. However, there may be some problems in the use after purchase, so choose the vendors who have after-sales service and technical support are more secure.



QSFP28 100G CWDM 1310nm 2km

Get In Touch

Whether you have a problem with our products, services or other things, you can ask us, our team is waiting for you!