Products

Long Span ADSS Fiber Optic Cable 200-1000m

Long Span ADSS Fiber Optic Cable 200-1000m Long Span ADSS Cables are principally used for aerial installations – typically on roadside power distribution poles. Being totally non-metallic, this product is ideal for applications in close proximity to power distribution lines.

Long Span ADSS Fiber Optic Cable 200-1000m

Long Span ADSS Fiber Optic Cable 200-1000m Long Span ADSS Cables are principally used for aerial installations – typically on roadside power distribution poles. Being totally non-metallic, this product is ideal for applications in close proximity to power distribution lines. This product is also suited to single point suspension applications where the product has to support either a higher load than conventional terrestrial cable or a permanent or varying tensile load, applied through the outer sheath. Standard pole-mounting hardware is readily available for this product.

Long Span ADSS Fiber Optic Cable 200-1000m
Long Span ADSS Fiber Optic Cable 200-1000m
A long span ADSS fiber optic cable has an outer jacket, a central tension rod member, and gel-free buffer tubes stranded around the rod member. Each tube is made of a flexible material having a determined elastic modulus, and optical fibers are contained in each tube with a water absorbent material. Water blocking yarns fill voids between the buffer tubes and surround the tubes. An inner jacket envelops the tubes and the yarns, and additional yarns are provided between the inner and the outer cable jackets. The elastic modulus of the buffer tubes is sufficiently high so that the cable sustains a compressive load of at least 220 N/cm over ten minutes with not more than a 0.1 dB increase in attenuation in any fiber. The rod member and the yarns enable the cable to span a distance of approximately 500 to 1050 feet in a NESC Heavy Load district.
Features:
Fully self-supporting – no messenger wire or lashing required
Hardware & accessories available
Custom designs available for longer span lengths or other fibre counts
Applications:
Utilised for telecommunications by power utilities, telcos, and private network groups
Designed for installation on distribution lines

ADSS Fiber Optic CableTechnical Parameter:

SPAN(M)ICE+WIND:0MM+35M/SECICE+WIND:12MM+30M/SEC
CABLE O.D.(MM/IN)CABLE WEIGHT (KG/KM)/(LB/KFT)MAX.WORKING TENSION(N/LB)MAX .SAG(%)CABLE O.D.(MM/IN)CABLE WEIGHT (KG/KM)/(LB/KFT)MAX.WORKING TENSION(N/LB)MAX .SAG(%)
10013.9/5.472152/102.017578/1704213.8/0.543150.0/100.676621/14892
20014.3/0.562161/108.0510430/2346314.1/0.555157.0/105.379000/20243
40015.9/0.625199/133.5623221/5223315.4/0.606187.0/125.5019225/43313
50016.7/0.657220/147.6530590/6881316.1/0.633204.0/136.9124885/55983
60016.3/0.641209/140.2726952/6063415.7/0.618196.0/131.5422154/49834
80016.5/0.649216/144.9729452/6625515.9/0.625201.0/134.9024042/54086
100016.7/0.657221/148.3231271/7034616.1/0.633204.0/136.9124407/54906

Mechanical Properties:

Minimum Bending Radius:Maximum Compressive Load:4000N
Under installation:20??ODRepeated Impact:4.4 N.m (J)
During operation10??OD for unarmoured cablesTwist (Torsion):180??10 times, 125??OD
20??OD for armoured cablesCyclic Flexing:100 cycles
Temperature Range:
Operating Temperature Range:-40??(-40?H) to +70??(+158?H)Crush Resistance:263N/cm (1250lb/in)
Storage Temperature Range:-50??(-58?H) to +70??(+158?H)

In addition, ADSS fiber cable is also suited to single-point suspension applications such as down mine shafts or any application where the product has to support either a higher load than conventional terrestrial cable or a permanent or varying tensile load that is applied through the outer sheath. What??s more, ADSS can withstand the worst-case combinations of extreme weather, ice load, and wind environments, guaranteeing reliable communications in outdoor situations.

ADSS cable is ideal for installation in distribution as well as transmission environments. Since the ADSS cables provide an optimal solution for a broader combination of fiber counts and span lengths, more and more aerial cabling system designers tend to adopt them for telecommunications, like power utilities, telcos, and private network groups. Combining convenience and cost-effectiveness, an aerial fiber-optic deployment requires this kind of fiber optic cables for better performance.

OpticalCharacteristics:

G.652D50/125??m62.5/125??m
Attenuation(+20)@850nm??3.0dB/km??3.0dB/km
@1300nm??1.0dB/km??1.0dB/km
@1310nm??0.36dB/km
@1550nm??0.22dB/km
Bandwidth(ClassA)@850nm??500MHz??km??200MHz??km
@1300nm??1000MHz??km??600MHz??km
NumericalAperture0.200??0.015NA0.275??0.015NA
CableCut-offWavelength??cc??1260nm

 

 

Fibre Optic Cable Transmission Distances
Fiber Optic Cable Transmission Distances
Dram for indoor Fiber Optic cable light weight cables 2Km
Dram for indoor Fiber Optic cable light weight cables 2Km
Dram for outdoor Fiber optic cable heavy weight cables 2Km
Dram for outdoor Fiber optic cable heavy weight cables 2Km
Cable Dram Information and marking
Cable Dram Information and marking
Brand

FOCC, OEM

Get In Touch

Whether you have a problem with our products, services or other things, you can ask us, our team is waiting for you!