Products

FO-SNC MILLER Fiber Optic Stripping and Kevlar Cutting Tool

The Miller FO-SNC combines jacket stripping, fiber stripping and the trimming of aramid yarn (Kevlar) all within a single compact ALL-IN-ONE tool.

FO-SNC MILLER Fiber Optic Stripping and Kevlar Cutting Tool

FO-SNC MILLER Fiber Optic Stripping and Kevlar Cutting Tool The Miller FO-SNC combines jacket stripping, fiber stripping and the trimming of aramid yarn (Kevlar) all within a single compact ALL-IN-ONE too

Compact “strip & cut” design integrates jacket stripping, fiber stripping & aramid fiber cutting into one dynamic tool Cable stripper & cutter are retractable into the handle to increase safety & tool longevity All cutting surfaces are precision-formed, hardened, tempered & ground to ensure accurate fiber stripping without damaging the fiber Patent-pending

FO-SNC MILLER Fiber Optic Stripping and Kevlar Cutting Tool

  1. Model : FO-SNC
  2. Place of Origin:United States
  3. Key Features: Stripping and Cutting functions
  4. Application:Fiber Optic Stripping and Kevlar Cutting Tool
  5. Operation : Manually
  6. Weight: 0.1kg
  7. Color:Yellow
  8. Type:Tool
  9. Brand:MILLER
  10. Material : Toolsteel

Features

1. The Miller FO-SNC combines jacket stripping, fiber stripping and the trimming of aramid yarn (Kevlar) all within a single compact ALL-IN-ONE tool.

2. The fiber stripper has three stripping notches.

3. The largest stripping notch at the outer tip of the tool is used to strip cable jackets from 1.63.0mm.Close the tool around the jacket, hold firmly and draw the tool towards the end of the cable to strip off the jacket material.

4. The middle notch is used to strip 900 micron tight buffer down to the 250 micron buffer coating.

5. The smallest notch is used to strip the 250 micron coating down to the 125 micron fiber. Ensure that all the fiber stripping notches are clean and clear of any debris.

Specifications

Dimensions3.75?? x 1.25?? x 0.7?? (95 x 32 x 18 mm)
Weight3oz(85g)
MaterialsToolsteel

 

1st Hole Application1.6 – 3 mm Jacket ?? 600 – 900 ??m Tight Buffer
2nd Hole Application900 ??m Tight Buffer ?? 250 ??m Buffer Coating
3rd Hole Application250 ??m Buffer Coating ?? 125 ??m Bare Fiber
FO-SNC MILLER Fiber Optic Stripping and Kevlar Cutting Tool
FO-SNC MILLER Fiber Optic Stripping and Kevlar Cutting Tool
The Miller FO-SnC combines jacket stripping, fiber stripping and the trimming of aramid yarn (Kevlar) all within a single compact ALL-IN-ONE tool.

Operation FO-SNC MILLER Fiber Optic Stripping and Kevlar Cutting Tool

Locate the stripper tool side and slide the black tab forward as shown in Figure. 1
The fiber stripper has three stripping notches.
The largest stripping notch at the outer tip of the tool is used to strip cable jackets from 1.6-3.0mm. Close the tool around the jacket, hold firmly and draw the tool towards the end of the cable to strip off the jacket material.
The middle notch is used to strip 900 micron tight buffer down to the 250 micron buffer coating.
The smallest notch is used to strip the 250 micron coating down to the 125 micron fiber.
Ensure that all the fiber stripping notches are clean and clear of any debris. Debris in a fiber notch can damage or break the fiber. The tool may be cleaned using a cleaner containing 99% isopropyl alcohol such as Miller FS400 Bifurcated Foam Tip Swipes.

Fiber Stripping

1) Insert the fiber into the desired tool notch
2) Hold the fiber square to the tool. Close the tool squarely and firmly around the fiber.
3) Draw the tool towards the end of the fiber exerting steady pressure. As fiber buffer and acrylates may vary, we recommend by starting with several short strips to acquire the desired finished strip length.
Kevlar Trimming – locate the tool Cutting side and slide the tab forward as shown in Figure. 2
and cut to the desired length
NOTE: This tool has been specifically designed for the cutting of aramid Kevlar yarn ONLY.
Use an industry approved cable gel cleaner or degreaser to clean residue on the cutting edges after use on cables containing water blocking gel.

What doesMeFiberOptic offer

We offer full range of quality and comprehensive fiber optic products, including Patchcord Production Machine, polishing jigs, as Seikoh Giken, Senko, Domaille or customized ones;Polishing Consumables, Tools,Cleanings,Tool Kits, Testing Equipment,Splice Items. We commit to offer you Attractive Price, Excellent Quality and Fast Delivery!

What will be the delivery cost

All price listed are FOB Shenzhen. Your nominated courier is acceptable. Otherwise, we will use FEDEX, DHL, UPS or any other forwarder per confirmation and charge accordingly.

How the goods will be delivered

For normal stockitems, they will be dispatchedwithin 1-2 business daysafter payment confirmation. However, for items out of stock, estimated leadtime will be 3-10 working days.

How can I order the goods

MeFiberOpticis pleased to offer our valuable customers three ordering channels. e.g.: Online Ordering, Fax Order Form and Issuing Formal Purchasing Order by mail.

How is the warranty forMeFiberOptic product

All products are warranted by MeFiberOptic (consumables, normal tear and wear excluded) for one year after date of purchase. Any part defected in material or workmanship and returned to MeFiberOptic, as MeFiberOptic designates, shipping costs prepaid, will be, as the exclusive remedy, repaired or replaced, at MeFiberOptic??s option.

FO-SNC MILLER Fiber Optic Stripping and Kevlar Cutting Tool

Get In Touch

Whether you have a problem with our products, services or other things, you can ask us, our team is waiting for you!